MS Noise™ Soundproof Enclosures
Noise reduction solutions for laboratories using:
- Vacuum Pumps
- Water Chillers
- Ultrasonic Baths
- Mixer Mills
- Nitrogen Generators
Is your laboratory equipped with state-of-the-art instruments such as Mass Spectrometers, SEMs, XPS, SIMS, NMR, ICP, XRD………….that require the use of noisy accessory equipment? Is your lab a noisy place in which to work? Is your concentration affected? Can you hear your colleagues speak?
Using a MS Noise™ soundproof enclosure can reduce noise to a much more acceptable level which will improve lab working conditions and provide a much quieter working environment.
Noise reduction enclosures, manufactured by MS Noise™, are guaranteed to reduce noise by 75%, equivalent to about 15 dB(A). Noise reduction boxes consist of two main parts: a base and a cover. Installation is very easy and is achieved without tools or disconnecting the appliance.
Easy and quick to install (And you don’t need to disconnect pump & vacuum pipes during the installation!)
There is convenient access for system checks and maintenance. Some models have a side window to check oil levels, and a side trap door for access to the screw ballast.
Pipe and cable connections are enclosed by polypropylene brush material, which provides protection against dust and contributes to additional soundproofing.
MS Noise™ products can accommodate a vast range of vacuum pumps, water chillers, ultrasonic baths, mixer mills, compressors and nitrogen generators and are available in standard or bespoke designs.
Compatible with all vacuum pump manufacturers:
Edwards, Leybold, Oerlikon, Varian, Alcatel, Adixen, Pfeiffer, Busch, Gast, Vaccubrand, Elmo, Rietschle……
Support vacuum pumps from leading electron microscope manufacturers
Jeol, Zeiss, Carl Zeiss, Hitachi, FEI……
And compatible with all main water coolers manufacturers!
Thick polyurethane acoustic foam material covers the interior part of the box. The foam has open cell construction that delivers very good noise absorption. The wavy form factor of the foam multiplies absorption capacity by increasing the surface area for sound reception. The foam is fire resistant and complies with FMVSS 302 and DIN 4102 B3.
The noise reduction level obtained by the combination of foam and plastic structure, with the pipes and cable inputs/outputs closed by a brush polypropylene is guaranteed at 15 dB(A).
MS Noise™ boxes are built for installation on the floor, thus precious bench space is not wasted. And they can also accommodate mist filters.
Noise Reduction EnclosureAll requirements related to lab safety are taken into account in the construction (ventilated box by bearing fans, use of non flammable materials, and use of heat resistant materials). MS noise reduction boxes conform to the European directive related to low voltage equipment 73/23/CEE.
Options and Accessories
- Overheating Temperature Alarm
- Vacuum oil tray on caster wheels
- Building Exhaust Accessories
- Oil drain Valve
- Oil drain pump
- Vibration dampening solutions – incl. mats, pads, isolators
- Vacuum Pump Oil Mist Filter
- Vacuum Pump fittings
- Custom Noise Reduction Enclosures – on request
For further information and prices, please contact us